THC Gummy Molds

Making compliant edibles starts with the right mold. Our THC gummy molds come with state-specific regulatory symbols pre-embossed into every cavity, so every piece ships ready to meet state labeling rules. Pour, set, release. The symbol is already there.

The collection covers multiple state compliance options. That includes the CO, FL, OH THC silicone mold with 192 cavities, the 10mg half-sheet square mold, and the Round THC Nevada candy mold for Nevada compliance. Each mold uses marked cavity volumes so your dosing math stays clean.

Need a general leaf shape or non-compliance option? Browse our leaf molds collection, or for deeper cavities, check our thick molds collection.

FDA-Approved
4.9 (843 Reviews)
Free Shipping over $35
Sort by:
Square Silicone Candy Mold - Colorado Ohio THC Symbol

4mL CO, FL, OH THC Silicone Square Candy Mold – 192 Cavities, Half Sheet | Chocolates & Gummies

$49.95 $39.95
4mL NV THC Square Silicone Candy Mold – 192 Cavities, Half Sheet | Chocolates & Gummies

4mL NV THC Square Silicone Candy Mold – 192 Cavities, Half Sheet | Chocolates & Gummies

$49.95 $39.95
4mL Square Silicone Candy Mold – MA, ME, RI, VT THC Symbol – 192 Cavities | Gummies & Chocolates

4mL Square Silicone Candy Mold – MA, ME, RI, VT THC Symbol – 192 Cavities | Gummies & Chocolates

$49.95 $39.95
4mL CA THC Square Silicone Candy Mold – 192 Cavities, Half Sheet | Gummies & Chocolates

4mL CA THC Square Silicone Candy Mold – 192 Cavities, Half Sheet | Gummies & Chocolates

$49.95 $39.95
square lollipop mold

4mL CO, FL, OH THC Square Lollipop Chocolate Mold – 14 Cavities | Candies & Gummies

$19.95 $10.95
Square Silicone Candy Mold - Oregon

4mL Square Silicone Candy Mold – DE, OK, OR THC Symbol – 192 Cavities, Half Sheet | Gummies & Chocolates

$49.95 $39.95
THC Round Candy Mold

2.8mL MA, ME, RI, VT THC Round Candy Mold – 192 Cavities, Half Sheet | Gummies & Chocolates

$49.95 $39.95
5mL Round Silicone Candy Mold – NV THC Symbol – 130 Cavities, Half Sheet | Gummies & Chocolates

5mL Round Silicone Candy Mold – NV THC Symbol – 130 Cavities, Half Sheet | Gummies & Chocolates

$49.95 $39.95
Square Silicone Candy Mold - Washington

4mL WA Square Silicone Candy Mold | 192 Cavities | Half Sheet | Chocolates & Gummies

$49.95 $39.95
THC Round Candy Mold

2.8mL Round Candy Mold - CO, FL, OH THC -130 Cavities, Half Sheet | Chocolates & Gummies

$49.95 $39.95
THC Square Silicone Mold

3.5mL MA ME RI VT THC Square Silicone Candy Mold – 266 Cavities – Half Sheet

$169.95 $121.90
THC Triangle Silicone Mold

2.5mL Triangle Silicone Candy Mold - MA, ME, RI, VT THC - 252 Cavities, Half Sheet | Gummies & Chocolates

$189.95 $120.65

Our Best Selling Molds

Chocolate Bar Molds, Marijuana Leaf Silicone Candy Trays, 2 Pack

Chocolate Bar Molds, Marijuana Leaf Silicone Candy Trays, 2 Pack

$19.99 $12.95
Square Silicone Candy Mold - No Symbol

3.8mL Square Silicone Candy Mold – 192 Cavities, Half Sheet | Gummies & Chocolates

$49.95 $39.95
2mL Square Silicone Candy Mold – 266 Cavities | Chocolates & Gummies

2mL Square Silicone Candy Mold – 266 Cavities | Chocolates & Gummies

$49.95 $39.95
5mL Square Gummy Silicone Mold – 192 Cavities, Half Sheet | Chocolates & Candies

5mL Square Gummy Silicone Mold – 192 Cavities, Half Sheet | Chocolates & Candies

$140.00 $123.66
Square Silicone Mold, 4mL, 192 Cavity, Half Sheet

Square Silicone Mold, 4mL, 192 Cavity, Half Sheet

$149.00 $113.04
Mushroom Silicone Mold, 4mL, 126 Cavity, Half Sheet, Blue

4mL Mushroom Silicone Candy Mold – 126 Cavities, Half Sheet | Gummies & Chocolates

$189.00 $129.40
Square Silicone Mold, 1mL, 600 Cavity, Half Sheet

1mL Square Gummy Silicone Mold – 600 Cavities, Half Sheet | Candies & Chocolates

$189.55 $137.78
2mL Square Silicone Candy Mold – 336 Cavities – Half Sheet | Chocolates & Gummies

2mL Square Silicone Candy Mold – 336 Cavities – Half Sheet | Chocolates & Gummies

$189.55 $121.27
View All

Our Customers Speak: 1 Million Molds, Millions of Reasons to Choose Us

pjbold.com widget logo

Shop Top Favorites – Loved by All

What Makes Our THC Gummy Molds Different?

State Symbol Pre-Embossed

Each cavity carries the regulatory symbol required by the target state — CO, FL, OH, NV, NY, CT, and others. Pour your mix, set it, pop out the piece. The symbol is already stamped into the gummy. No post-processing, no separate stamping step.

Uniform Cavity Volume for Accurate Dosing

Every cavity in a given mold holds the same volume, so every gummy gets the same dose. A 4mL cavity is 4mL across all 192 pieces. That matters when you're calculating 10mg THC per piece or matching a state's dosing cap. Consistent cavity size makes consistent dosing possible.

FDA and LFGB Compliant

The silicone is FDA-compliant, LFGB-compliant, and BPA-free. It meets FDA 21 CFR 177.2600, the US standard for rubber articles in repeat food contact. Built for commercial edibles kitchens where food safety documentation matters.

Platinum-Cured Silicone, Made in USA

Platinum-cured silicone is the higher grade used in commercial candy production. The molds are made in the USA and built to hold up across thousands of cycles without warping, cracking, or losing detail on the embossed symbol.

How to Buy the Right THC Gummy Mold

1

Start With Your State Requirements

Each state has its own THC symbol. Colorado, Florida, and Ohio share one design. Nevada uses another. New York and Connecticut each have distinct symbols. Match the mold to the state you're selling in. For example, the NV THC square silicone mold is built for Nevada compliance, while the NY THC square silicone mold uses the NY regulatory triangle.

2

Check Cavity Volume Against Your Dose Math

Most states cap THC per serving at 10mg. Match cavity volume to your mix's potency so each gummy lands at or under that limit. A 3.6mL square mold suits smaller doses. A 4.75mL NV mold gives more room. Calculate per cavity, not per tray.

3

Plan for Batch Size

A half-sheet mold with 192 cavities produces 192 gummies per pour. If you're running a licensed kitchen or dispensary production line, multiple trays per pour saves time. The 3mL square half-sheet mold with 247 cavities gives even higher output per tray.

4

Think About Chocolate Bars Too

THC compliance isn't just for gummies. If you're making infused chocolate bars, our CO, FL, OH THC candy bar mold has 5 cavities at 74.45mL each, with the state symbol embossed on every bar. Same compliance logic, larger format.

1

Start With Your State Requirements

Each state has its own THC symbol. Colorado, Florida, and Ohio share one design. Nevada uses another. New York and Connecticut each have distinct symbols. Match the mold to the state you're selling in. For example, the NV THC square silicone mold is built for Nevada compliance, while the NY THC square silicone mold uses the NY regulatory triangle.

Check Cavity Volume Against Your Dose Math

Most states cap THC per serving at 10mg. Match cavity volume to your mix's potency so each gummy lands at or under that limit. A 3.6mL square mold suits smaller doses. A 4.75mL NV mold gives more room. Calculate per cavity, not per tray.

2
3

Plan for Batch Size

A half-sheet mold with 192 cavities produces 192 gummies per pour. If you're running a licensed kitchen or dispensary production line, multiple trays per pour saves time. The 3mL square half-sheet mold with 247 cavities gives even higher output per tray.

Think About Chocolate Bars Too

THC compliance isn't just for gummies. If you're making infused chocolate bars, our CO, FL, OH THC candy bar mold has 5 cavities at 74.45mL each, with the state symbol embossed on every bar. Same compliance logic, larger format.

4

Tips for Using THC Gummy Molds

  • 1

    Calculate Dose Before You Pour

    Weigh your total THC input, divide by the number of cavities in the mold, and confirm each cavity lands within state limits. Do this math before you heat the mix, not while you're pouring. A minute of calculation prevents a whole batch of non-compliant pieces.

  • 2

    Keep Mix Temperature Consistent

    Uneven temperature across the pour causes uneven fill levels, which changes the dose per piece. Keep your mix at a steady temperature throughout the pour. A heated pitcher or double boiler holds it steady better than a saucepan off the burner.

  • 3

    Fill to the Rim, Not Over

    Overfilling creates connecting flash between cavities. That flash adds extra mass to each piece, which throws off your dose calculations. Fill each cavity to the rim exactly. The scrape method works well for high-cavity molds.

  • 4

    Tap the Tray to Settle the Symbol

    The state symbol sits at the bottom of each cavity. Air bubbles trapped there leave a weak imprint on the finished piece. Tap the tray firmly on the counter three times after pouring so the air rises out and the mix settles into every detail.

  • 5

    Document Every Batch

    Licensed kitchens need batch records. Log the mold used, cavity volume, total THC input, yield per tray, and final dose per piece. That paper trail matters during audits. For the full process from dough to labeled edible, see our how to make weed gummies at home in easy steps guide.

How to Care for Your THC Gummy Molds

  • Rinse with warm water right after unmolding so sugar and gelatin don't harden in the symbol grooves
  • Wash with mild dish soap by hand, or put on the top rack of the dishwasher
  • Pay attention to the embossed symbol area — residue there blurs the imprint on your next batch
  • Don't use metal tools or rough scrubbers since they can damage the precise symbol edges
  • Air-dry fully before storing so moisture doesn't sit in the cavity or symbol grooves
  • Store flat and never fold or crease since creasing weakens the silicone and distorts the symbol
View Full Care Guide

FAQs

The collection covers CO, FL, OH (shared symbol), NV, NY, CT, and MA, ME, RI, VT (shared symbol). Each mold is labeled with the state or states it complies with. Always match your mold to the state you're selling in, since symbols are state-specific and not interchangeable.

Yes. They're made from platinum-cured silicone that's FDA-compliant, LFGB-compliant, and BPA-free. That meets FDA 21 CFR 177.2600, the federal rule for rubber in repeat food contact.

Cavity volumes are precise, but dosing accuracy also depends on how evenly you mix your THC extract into the gummy base. Stir thoroughly so THC distributes evenly throughout the mix, then fill every cavity to the same level. Third-party lab testing of finished pieces is still the gold standard for commercial edibles.

Yes. The cavities are just shapes — the THC symbol doesn't change how they work for other recipes. You can make CBD gummies, regular sugar gummies, chocolate, or hard candy in the same molds. Keep in mind that the state symbol will still be embossed on every piece, so these molds work best for products where that symbol makes sense.

Each state has its own regulatory symbol shape and design requirements. Our complete guide to THC regulatory symbols breaks down each state's symbol and what it means for edibles producers. Our blog on the power of symbols for weed in cannabis covers why clear compliance labeling matters for consumer safety.

Yes. The half-sheet format fits the depositor bed, and the flat tray layout works well with automated filling. If you're scaling up production with a depositor, match your mold width to the depositor conveyor width before ordering.

Custom Silicone Molds That Fill Clean And Waste Nothing.

Most molds do the job but leave you throwing out product from uneven fills. Ours make sure every cavity comes out exactly the same.

Order Your FREE Sample

Food-Safe Material

FDA-approved material to ensure safety and delectable results.

Customization Options

Tailor your molds to your needs for a truly unique experience.

Proactive Customer Support

Reliable assistance with our dedicated and responsive customer support.

Secure Payments

Shop confidently with our secure and hassle-free payment options.