How to make Weed Gummies

Do you want to know how to make weed gummies for the most satisfying finish? Are you looking for a more cost-effective solution to consume these blissful delights? We can understand!

Homemade weed gummies are cheaper. They also offer greater customization and quality. And you can achieve the most desirable results as long as you understand the basics of cannabis edibles. 

These essentially include the cannabis tinctures, decarboxylation, and potency levels. Sounds complex? But don’t worry. Our full guide on how to make weed gummies at home will keep things simpler!

We will break down the cannabis gummy recipe into easy-to-follow steps. We will also guide you through the essence of the decarboxylation process and the fun of customization. Let’s get started.

Understanding Cannabis Edibles

Are you just getting started with customizing weed gummies? Well, you must start with the basics. You can then easily grasp how to make marijuana gummies.

Let’s start with the tinctures!

Basics of Cannabis Tincture

Cannabis edibles are infused with THC or CBD tinctures. Both induce a sensation of calm and relaxation. But don’t you think they are the same!

CBD tincture gummies do not produce a ‘High.’ While THC tinctures are more potent. They set off intense euphoria and heightened senses. The altered perception of space and time is another factor. Knowing the difference between the two, you can smartly choose what you’re looking for!

Decarboxylation Process

You can buy the right cannabis tincture for weed gummies. But you can also make your own – You choose it! Decarboxylation of cannabis is used to activate its psychoactive attributes when making your own THC tincture. It plays a decisive role in making weed gummies more potent.

So, how do you decarboxylate your weed? Read the steps below to find out.

  • Preheat the oven to 250°F. It ascertains the cannabinoids and terpenes in the buds are not destroyed by overheating.
  • Break down the buds into smaller pieces. Spread them evenly across the baking sheet. Place in the oven for 20 minutes stirring occasionally.

Preparing Your Kitchen

Instead of diving headfirst into the process of the edible gummy recipe, take some time to prepare your kitchen for it. Gather all the right ingredients, tools, and gummy molds. Organize them neatly to ensure a fun and hassle-free process. Let’s start with selecting the right materials.

Gathering the Ingredients

You will need the following important ingredients.

  • Cooking Spray
  • Decarbed Cannabis Flower
  • 1 Cup Cooking Oil
  •  1 Packet Flavored Jello
  • 2 Tablespoons of Unflavored Gelatin
  • ½ Cup of Cold Water
  • ½ Teaspoon Soy Lecithin Oil

Selecting the Right Tools

Now, it’s time to select the best tools for the best execution of the cannabis gummy recipe!

  • Saucepan: You can choose any from a non-stick or stainless steel.
  • Whisk: Use a silicon whisk with a non-stick saucepan.
  • Gummy molds: Use PJ Bold’s Hemp Leaf Silicone Candy Molds for the best shape.

At PJ Bold, our Marijuana Leaf Gummy Molds come with their own eyedropper for a clean and easy filling. We ensure that you don’t need to buy your eyedroppers separately.

Have no worries about your gummies sticking to the mold. Made from highly flexible silicone with non-stick and durable properties, our gummy molds ensure a seamless finish!

Silicone Mold

Setting Up The Workspace

A good workspace is key for the most fun when following our edible gummy recipe.

  • Remove all the clutter and make sure you have enough room to work in the kitchen.
  • Keep your work area clean to avoid any contamination during the cooking process.
  • Gather all the ingredients and tools. Keep them nearby to save time and avoid any confusion.
  • Wash the gummy molds in the dishwasher or by hand with dish liquid and dry them up.
  • Place parchment paper under the gummy molds to gather any of the spills during the filling process.

And now you’re ready to have some fun making weed gummies!

Step-by-Step Guide to Making Weed Gummies

Here’s the cannabis gummy recipe for the most chewy and delightful weed gummies at home!

Step 1. Making the Cannabis Oil

Set a simmering double boiler and add 1 cup of cooking oil to its top part. Once the oil reaches 160 to 180°F, add the decarbed cannabis flower. Cook it with occasional stirring for 2 - 4 hours. Then remove it from heat and strain the cannabis-infused oil from the flower.
Cannabis Oil

Step 2. Preparing the Weed Gummy Mixture

Add ½ cup of cannabis oil to unflavored gelatin, Jello mix, and soy lecithin oil in a saucepan. Add cold water to the mixture and place it on the stove with low heat. Mix for 10-15 minutes or until the gelatin melts.

Step 3. Pouring the Mixture into Gummy Molds

Take the mixture off the stove once it's all melted and combined. Quickly use an eyedropper to fill the marijuana leaf gummy molds with the mixture. Don’t let the mixture cool down as it would make it hard to fill the mold cavities.
Gummy molds

Step 5. Setting the Weed Gummies

Carefully remove the extra spills once your gummy molds are filled. Then place the molds in the refrigerator. Wait till they harden. Normally it would take 2 to 3 hours. If you place them in the freezer they would take 1 -2 hours. The longer they stay in the freezer the firmer they will become!

Step 6. Releasing the Weed Gummies

Here’s the fun part! Once your gummies are all set, remove them from the silicone gummy molds. This would be a hassle-free process with PJ Bold’s highly flexible silicone molds. Simply bend the mold and your weed gummies will pop out in an instant.

Weed Gummies

Now, you’re all done grasping how to make weed gummies at home! Are you facing any troubles during the process? See if our troubleshooting tips help you out!

Tips for Troubleshooting 

  • Soft Gummies: Gummies can end up too soft due to excess water and low gelatin content. The best thing you can do is to coat them thinly with some sugar or cornstarch as a quick fix.
  • Uneven Texture: Sometimes your gummies end up having bits of hard gelatin. This happens when gelatin is clumped and not properly bloomed. You can avoid this by adding gelatin slowly over a large surface area of water.
  • Sweating Gummies: Tincture gummies can sweat and stick together sometimes. In that case, you can coat them with citric acid or a coating of % oil and 10% carnauba wax. Another way is to use a dehydrator to remove the excess moisture.
  • Stir Constantly: Make certain your gummy mixture is equally infused with THC by stirring it constantly. Otherwise, you may end up with uneven THC dose in your weed gummies.
  • Avoid Boiling: Don’t let your gummy mixture boil after infusing it with THC. High heat may degrade the THC contributing to reduced potency.
  • Keep Silicone Molds Dry: Another culprit for sticky gummies is improperly dried silicone molds. Be certain to dry the molds and cover them before you prepare the gummy mixture.

Knowing all the steps and tips in depth, we hope you are now smarter about how to make pot gummies at home. Let’s move forward to adding a personal touch to these chewy delights!

Customizing Your Gummies

Don’t hold back from customizing your gummies with a variety of flavors, shapes, and infusions. Fully avail the freedom to personalize them. After all, that’s the fun of making THC gummies at home. Here are some ideas to ignite your creativity!

Gummy Bear

Experiment with the Flavors

The customization options are endless for homemade THC tincture gummies. You can add spicy, tangy, aromatic flavors. A few drops of extracts and essential oils like peppermint, rose, vanilla, and almond add to the tantalizing experience of weed gummies.

Fresh fruit purees are also an excellent choice for those seeking a refreshing taste. They are also a healthier alternative to refined sugar. Experiment with the flavors you like and keep every bite full of surprise!

Get Creative with Silicone Molds

Don’t let it stop to flavors! Add more fun to your weed gummies by using molds with creative shapes and sizes. Silicone Molds are the best choice for this owing to their diverse shapes and patterns. They are also highly flexible ensuring your plunge into creativity does not end in despair!

From marijuana leaf shape to heart, berry candy, bear, and worms, the possibilities for creativity are endless. Silicone gummy molds are also more durable and less sticky. This makes them the best choice for making some fun weed gummies.

Silicone Molds

Adjusting the Cannabis Potency

Another benefit of learning how to make weed gummies is tailoring the potency of tinctures to your tolerance. The personalization makes the consumption all the more fun and delightful.

You can start with a low dose to indulge in breezy calm and relaxation throughout the day. Highly tolerant users can experiment with higher doses to enliven stronger euphoria and tranquility.

Safety and Storage

Weed gummies are fun to make and blissful to consume. The versatile ways to enhance their flavor and strengths add more to their appeal. But practicing caution goes a long way! Utilize the best storage and safety tips to enjoy these delightful treats at home. Here’s what these are:

Best Practices for Storing Weed Gummies

  • Use Air-tight Containers: Store your homemade weed gummies in an airtight container. It prevents bacteria from building up while also ensuring a fresher taste.
  • Use Clear Labeling: Label the jar with weed gummies according to its contents. Add a clear date of manufacturing so you can track when they will expire.
  • Place them in the Freezer: Placing gummies in the freezer enhances their lifespan. Mold and bacterial growth is also kept at bay at colder temperatures.
  • Keep Away from Children: Store your weed gummies in a place not reached by children and pets. Preferably lock them away to avoid accidental consumption.
  • Line Them with Wax Paper: Place wax paper alternatively with gummy layers. It is useful for preventing gummies from crumpling together.

Adjusting the Dose and Consumption

The freedom to adjust the THC dose in weed gummies makes them a popular choice for most cannabis users. However, the strength of THC must be handled with care. Doses of 100mg or higher are only recommended for high-tolerant users.

Start with a low dose if you are new to cannabis edibles. 2.5 to 5 mg is generally safe for most consumers. Keep in mind that THC edibles take longer to kick in than vapes and sublingual tinctures. Stay patient. Wait for 1 to 2 hours before you add up on the dose.

Legal Considerations

Weed gummies are a sweet treat for stressed and overworked nerves. These blissful delights are even better consumed within the framework of law.

Therefore, it is important to understand the legal considerations of cannabis edibles while learning how to make weed gummies. The regulatory laws regarding cannabis consumption differ across regions.

Check your local laws and regulations to avoid legal issues with the use of cannabis. Look for the right THC regulatory symbol on the molds you buy online. It should follow your country's local THC symbol.

Apart from laws and regulations, understand the addiction risks associated with cannabis use. Try to use it occasionally and in smaller doses to fight off addiction effects.


What type of oil should you use for weed gummies?

Consider using oils with a high content of saturated fat such as avocado oil and coconut oil. Oils that absorb quickly like MCT oil are also a good choice for experiencing cannabis effects faster.

Should you swallow or chew weed gummies?

Weed gummies are a form of cannabis edibles. They should be chewed before swallowing. The chewing process stimulates the production of digestive juices. Hence aiding in faster absorption of cannabis.

How to calculate the THC dose for homemade weed gummies?

On average, 1 gram of cannabis is reported to have 10% of THC content. This implies that you should estimate 100 milligrams of THC per 1 gram of cannabis when making homemade weed gummies. Factor in your tolerance level. Novices should start with 2.5 - 5 mL of THC per gummy.

How long do gummy edibles last?

The effects of THC gummies last for 6 or more hours. This is because gummy edibles are taken by mouth and undergo all the digestion phases. The liver digestion converts the THC into a more potent and longer-lasting compound called 11-OH-THC.

What preservative should I use for cannabis gummies?

You can use extra citric acid and potassium sorbate as preservatives when making cannabis gummies at home. A dehydrator can remove excess water from the gummies and further increase their shelf life.

Can I use store-bought gummies to make weed gummies?

Yes, you can use the store-bought gummies to make weed gummies. Add a few tablespoons of water and melt them at low heat with constant stirring. Then add in the THC dose that works for you the best. Thoroughly mix and pour into the cavities of silicone molds to make THC gummies.


Making cannabis edibles at home is a delightful journey towards personalizing these blissful treats. They offer the perfect opportunity for tailoring the flavor, shape, and THC dose of weed edibles to your needs.

We have provided valuable insights to help you smartly grasp how to make weed gummies at home. Add in your favorite flavors and get creative with their shapes to make every bite a delightful experience.

Let your creativity run wild and create something unique and exciting. The possibilities are endless with the freedom to personalize these sweet treats!