Rendez vos fêtes mémorables avec nos moules à bonbons au THC

Découvrez la joie de réaliser de splendides chocolats et bonbons avec nos moules à bonbons gélifiés au THC (tétrahydrocannabinol). Nos moules sont parfaits pour créer des articles sucrés pour des occasions spéciales !

Ces moules en gélatine sont conformes aux normes de la FDA, ce qui garantit qu'ils sont sûrs pour créer vos délices comestibles. Fabriqués à partir de matériaux de qualité supérieure et durables, les moules sont conçus pour durer et vous apporter un plaisir sans fin lors de vos célébrations.

Choisissez parmi une large gamme de modèles de moules ou optez pour une option personnalisée adaptée à votre goût unique.

De plus, nos moules sont également faciles à nettoyer et à entretenir.

De plus, nos moules innovants en gommes THC sont respectueux de l'environnement et sans produits chimiques, ce qui vous permet de profiter de vos friandises sans aucun problème environnemental.

Parcourir la collection de moules à bonbons gélifiés PJ Bold THC

FDA-Approved
4.9 (843 Reviews)
Free Shipping over $35
Trier par:
Moule à bonbons carré NV THC - 3,7 ml, 70 cavités

Moule à bonbons carré NV THC - 3,7 ml, 70 cavités

$49.95 $29.95
THC Triangle Silicone Mold

Moule en silicone triangulaire MA, ME, RI, VT THC - 3,5 ml, 209 cavités, demi-feuille

$189.00 $126.45
3.6mL NJ THC Square Candy Mold – 80 Cavities, Half Sheet | Chocolates & Gummies

3.6mL NJ THC Square Candy Mold – 80 Cavities, Half Sheet | Chocolates & Gummies

$49.95 $29.95
MA, ME, RI, VT THC Square Silicone Mold- 4.75mL, 165 Cavity, Half Sheet

4.75mL Square Silicone Candy Mold - MA, ME, RI, VT THC -165 Cavities, Half Sheet | Gummies & Chocolates

$150.00 $102.47
4.75mL NV THC 10mg Square Silicone Candy Mold – 104 Cavities – Half Sheet | Chocolate & Gummies

4.75mL NV THC 10mg Square Silicone Candy Mold – 104 Cavities – Half Sheet | Chocolate & Gummies

$139.95 $101.35
Moule à barres chocolatées au THC CO, FL, OH - 52,7 ml, 5 cavités

Moule à barres chocolatées au THC CO, FL, OH - 52,7 ml, 5 cavités

$79.95 $63.48
Moule carré en silicone CO, FL, OH THC, 4 ml, 192 cavités, demi-feuille

Moule carré en silicone CO, FL, OH THC, 4 ml, 192 cavités, demi-feuille

$189.90 $120.39
CT THC Square Silicone Mold

Moule carré en silicone CT THC, 3,6 ml, 80 cavités, demi-feuille

$189.90 $107.29
Moule carré en silicone NY THC, 3,6 ml, 80 cavités, demi-feuille

Moule carré en silicone NY THC, 3,6 ml, 80 cavités, demi-feuille

$189.90 $107.40

Our Best Selling Molds

Mushroom Candy Bar Mold

Moule à barres chocolatées en forme de champignon, 6 cavités

$139.95 $84.52
Moule carré en silicone, 3,5 ml, 266 cavités, demi-feuille

Moule carré en silicone, 3,5 ml, 266 cavités, demi-feuille

$189.90 $131.71
Heart Wax Melt Mold

Cire fondante en forme de cœur, 0,54 ml, 452 cavités, demi-feuille

$189.80 $136.60
THC Square Silicone Mold

Moule carré en silicone THC MA, ME, RI, VT - 3,5 ml, 266 cavités, demi-feuille

$169.95 $121.90
THC Triangle Silicone Mold

Moule en silicone triangulaire MA, ME, RI, VT THC - 2,5 ml, 252 cavités, demi-feuille

$189.95 $120.65
Gummy Worm Silicone Mold, 4mL, 87 Cavity, Half Sheet, Blue

Moule en silicone pour vers en gélatine, 4 ml, 87 cavités, demi-feuille

$189.00 $119.42
Half Dome Silicone Mold

Moule en silicone demi-dôme, 2 ml, 234 cavités, demi-feuille

$189.95 $146.48
Mushroom Candy Bar Mold

Moule à barres chocolatées en forme de champignon, bleu, 6 cavités

$124.99 $83.28
Tout voir

Our Customers Speak: 1 Million Molds, Millions of Reasons to Choose Us

pjbold.com widget logo

Shop Top Favorites – Loved by All

What Makes Our THC Gummy Molds Different?

State Symbol Pre-Embossed

Each cavity carries the regulatory symbol required by the target state — CO, FL, OH, NV, NY, CT, and others. Pour your mix, set it, pop out the piece. The symbol is already stamped into the gummy. No post-processing, no separate stamping step.

Uniform Cavity Volume for Accurate Dosing

Every cavity in a given mold holds the same volume, so every gummy gets the same dose. A 4mL cavity is 4mL across all 192 pieces. That matters when you're calculating 10mg THC per piece or matching a state's dosing cap. Consistent cavity size makes consistent dosing possible.

FDA and LFGB Compliant

The silicone is FDA-compliant, LFGB-compliant, and BPA-free. It meets FDA 21 CFR 177.2600, the US standard for rubber articles in repeat food contact. Built for commercial edibles kitchens where food safety documentation matters.

Platinum-Cured Silicone, Made in USA

Platinum-cured silicone is the higher grade used in commercial candy production. The molds are made in the USA and built to hold up across thousands of cycles without warping, cracking, or losing detail on the embossed symbol.

How to Buy the Right THC Gummy Mold

1

Start With Your State Requirements

Each state has its own THC symbol. Colorado, Florida, and Ohio share one design. Nevada uses another. New York and Connecticut each have distinct symbols. Match the mold to the state you're selling in. For example, the NV THC square silicone mold is built for Nevada compliance, while the NY THC square silicone mold uses the NY regulatory triangle.

2

Check Cavity Volume Against Your Dose Math

Most states cap THC per serving at 10mg. Match cavity volume to your mix's potency so each gummy lands at or under that limit. A 3.6mL square mold suits smaller doses. A 4.75mL NV mold gives more room. Calculate per cavity, not per tray.

3

Plan for Batch Size

A half-sheet mold with 192 cavities produces 192 gummies per pour. If you're running a licensed kitchen or dispensary production line, multiple trays per pour saves time. The 3mL square half-sheet mold with 247 cavities gives even higher output per tray.

4

Think About Chocolate Bars Too

THC compliance isn't just for gummies. If you're making infused chocolate bars, our CO, FL, OH THC candy bar mold has 5 cavities at 74.45mL each, with the state symbol embossed on every bar. Same compliance logic, larger format.

1

Start With Your State Requirements

Each state has its own THC symbol. Colorado, Florida, and Ohio share one design. Nevada uses another. New York and Connecticut each have distinct symbols. Match the mold to the state you're selling in. For example, the NV THC square silicone mold is built for Nevada compliance, while the NY THC square silicone mold uses the NY regulatory triangle.

Check Cavity Volume Against Your Dose Math

Most states cap THC per serving at 10mg. Match cavity volume to your mix's potency so each gummy lands at or under that limit. A 3.6mL square mold suits smaller doses. A 4.75mL NV mold gives more room. Calculate per cavity, not per tray.

2
3

Plan for Batch Size

A half-sheet mold with 192 cavities produces 192 gummies per pour. If you're running a licensed kitchen or dispensary production line, multiple trays per pour saves time. The 3mL square half-sheet mold with 247 cavities gives even higher output per tray.

Think About Chocolate Bars Too

THC compliance isn't just for gummies. If you're making infused chocolate bars, our CO, FL, OH THC candy bar mold has 5 cavities at 74.45mL each, with the state symbol embossed on every bar. Same compliance logic, larger format.

4

Tips for Using THC Gummy Molds

  • 1

    Calculate Dose Before You Pour

    Weigh your total THC input, divide by the number of cavities in the mold, and confirm each cavity lands within state limits. Do this math before you heat the mix, not while you're pouring. A minute of calculation prevents a whole batch of non-compliant pieces.

  • 2

    Keep Mix Temperature Consistent

    Uneven temperature across the pour causes uneven fill levels, which changes the dose per piece. Keep your mix at a steady temperature throughout the pour. A heated pitcher or double boiler holds it steady better than a saucepan off the burner.

  • 3

    Fill to the Rim, Not Over

    Overfilling creates connecting flash between cavities. That flash adds extra mass to each piece, which throws off your dose calculations. Fill each cavity to the rim exactly. The scrape method works well for high-cavity molds.

  • 4

    Tap the Tray to Settle the Symbol

    The state symbol sits at the bottom of each cavity. Air bubbles trapped there leave a weak imprint on the finished piece. Tap the tray firmly on the counter three times after pouring so the air rises out and the mix settles into every detail.

  • 5

    Document Every Batch

    Licensed kitchens need batch records. Log the mold used, cavity volume, total THC input, yield per tray, and final dose per piece. That paper trail matters during audits. For the full process from dough to labeled edible, see our how to make weed gummies at home in easy steps guide.

How to Care for Your THC Gummy Molds

  • Rinse with warm water right after unmolding so sugar and gelatin don't harden in the symbol grooves
  • Wash with mild dish soap by hand, or put on the top rack of the dishwasher
  • Pay attention to the embossed symbol area — residue there blurs the imprint on your next batch
  • Don't use metal tools or rough scrubbers since they can damage the precise symbol edges
  • Air-dry fully before storing so moisture doesn't sit in the cavity or symbol grooves
  • Store flat and never fold or crease since creasing weakens the silicone and distorts the symbol
View Full Care Guide

FAQs

The collection covers CO, FL, OH (shared symbol), NV, NY, CT, and MA, ME, RI, VT (shared symbol). Each mold is labeled with the state or states it complies with. Always match your mold to the state you're selling in, since symbols are state-specific and not interchangeable.

Yes. They're made from platinum-cured silicone that's FDA-compliant, LFGB-compliant, and BPA-free. That meets FDA 21 CFR 177.2600, the federal rule for rubber in repeat food contact.

Cavity volumes are precise, but dosing accuracy also depends on how evenly you mix your THC extract into the gummy base. Stir thoroughly so THC distributes evenly throughout the mix, then fill every cavity to the same level. Third-party lab testing of finished pieces is still the gold standard for commercial edibles.

Yes. The cavities are just shapes — the THC symbol doesn't change how they work for other recipes. You can make CBD gummies, regular sugar gummies, chocolate, or hard candy in the same molds. Keep in mind that the state symbol will still be embossed on every piece, so these molds work best for products where that symbol makes sense.

Each state has its own regulatory symbol shape and design requirements. Our complete guide to THC regulatory symbols breaks down each state's symbol and what it means for edibles producers. Our blog on the power of symbols for weed in cannabis covers why clear compliance labeling matters for consumer safety.

Yes. The half-sheet format fits the depositor bed, and the flat tray layout works well with automated filling. If you're scaling up production with a depositor, match your mold width to the depositor conveyor width before ordering.